MMAMIG-Welder--MMAMIG-130-MIGMAG-Welding

MIG/MAG Welding

MIG/MAG or GMAW

  • SAFETY
  • ENERGY CONSERVATION
  • HIGH EFFICIENCY
  •  STABILITY

Gas metal arc welding (GMAW), sometimes referred to by its subtypes metal inert gas (MIG) welding or metal active gas (MAG) welding, is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt, and join.

Along with the wire electrode, a shielding gas feeds through the welding gun, which shields the process from contaminants in the air. The process can be semi-automatic or automatic. A constant voltage, direct current power source is most commonly used with GMAW, but constant current systems, as well as alternating current, can be used. There are four primary methods of metal transfer in GMAW, called globular, short-circuiting, spray, and pulsed-spray, each of which has distinct properties and corresponding advantages and limitations.

  • Welding arc
    2. Gaseous protection
    3. Contact tip
    4. Nozzle
  • Wire electrode
    6. Melting pool
    7. Solidified deposit

Inverter control technology

Inverter control technology

MIG or MAG we ding

MIG or MAG we ding

Flux cored wire arc (FCAW) welding

Flux cored wire arc (FCAW) welding

Direct Current Stick [SMAW or MMA] welding

Direct Current Stick [SMAW or MMA] welding

Increases the welding current at the beginning of the welding

Increases the welding current at the beginning of the welding

Allows you to easily withdraw your electrode without damaging it in case of sticking metal

Allows you to easily withdraw your electrode without damaging it in case of sticking metal

Increases the welding current in order to avoid the sticking when the electrode enters in melted metal

Increases the welding current in order to avoid the sticking when the electrode enters in melted metal

MOSFET INVERTER
High performance
Wide range of working piece(material)
Complete with CO2 Kit
Suitable for Professional working

Standard Packing: Carton

MIG MAG Welding 04
TECHNICAL PARAMETERMMA/MIG-130
Main Voltage (AC/V)1PH 230
Frequency (Hz)50/60
Input Capacity (KVA)3.6 / 3.2
No Load Voltage (V)63 / 63
Welding Current (A)20-115 / 20-130
Duty Cycle (40℃/%)35 / 35
Electrode (φ/mm)1.6-4.0 / 0.8-1.0
Insulation ClassF
Protection Degree (IP)IP21S
Dimension (mm)420X260X300
Weight (Kg)9.3

Packaging and Shipment

welding cutting machine packing and shipment